System Setup - SANY SY115C9 Safety, Operation And Manitenance Manual

SY115C9/135C/155H Crawler Hydraulic Excavator

3.3.2.15 System Setup

Access to "Machine Setup" requires a pass
code.
Screen output
1. A 5-digit pass code is required to access
"Machine Setup", with each indicated by
an asterisk (*) standing for a value from 0
to 9. A numeral appears at the digit where
the cursor is located while the other four
digits are in asterisk. Press [F3] to change
all digits into asterisks.
2. Press [F1 to increase/decrease the digit
value at where the cursor is located.
3. Press [F2] to move the cursor the left/right
digit.
4. Press [F3] to check the validity of pass
code. If it is correct, you are able to access
"System Setup"; if wrong, you will be
prompted by "Pass code invalid, try
again!"
5. Press [F5] to return to the "Main Page".
Keypad input
[F1]: Increase/decrease the value at where the cursor is located.
[F2]: Move the cursor to the left/right digit.
[F3]: Check the validity of pass code. If it is correct, you are able to access the "System Set-
up".
[F5]: Return to the "Main Menu".
[ESC]: Return to the "Main Menu".
[Enter]: Check the validity of pass code. If the pass code is valid, you are allowed to access "Ma-
chine Setup".
Remark:
The pass code is only revealed to related commissioning or service personnel.
Safety, Operation and Maintenance Manual - Aug 2012
Please enter the password:
1
＊ ＊ ＊ ＊ ＊
2 3
Fig. 3-25
System Functions

System Setup

4
5
XP1351106020
3-27