Installation Diagram - Wilson Electronics AG Pro Quint Installation Manual

Installation Diagram

Inside Antenna
Preferred Method: Place the Inside
Antenna in the ceiling facing down for
the best coverage.
Note: The Inside Antenna may be
mounted on the wall directly under the
Outside Antenna, in the null zone, if
20 feet of vertical separation can be
maintained.
Null Zone: The area under the
Outside Antenna, where the
Outside Antenna radiates the
least.
Note: A Lightning Surge Protector is
recommended for all building installations
(sold separately). Make sure the protector
is installed in line between the Outside
Antenna and the Signal Booster.
3
Contact Wilson Electronics Technical Support Team with any questions at 866-294-1660
or email: tech@wilsonelectronics.com.
Outside Antenna
(Wid (Wide Band Directional
Ante Ante Antenna shown)
(Optional
second
antenna for
additional
coverage).
Typical Installation
eam with any questions at 866 294 1660
Mon.- Fri. Hours: 7 am to 6 pm MST.
Inside Antenna
Power
Supply