Table of Contents
Advertisement
Installation Diagram
Per FCC rules, height not to exceed
10M (32' 9") above ground .
See RF Safety Warning (page 15) for proper
installation .
Inside Antenna
Preferred Method: Place the Inside
Antenna in the ceiling facing down
for the best coverage .
Note: The Inside Antenna may be
mounted on the wall directly under
the Outside Antenna, in the null zone,
if 15 feet of vertical separation can be
maintained.
Null Zone: The area under
the Outside Antenna, where
the antenna radiates the
least .
Note: A Lightning Surge Protector is
recommended for all building installations.
Make sure the protector is installed in line
between the Outside Antenna and the
Signal Booster.
3
Contact Wilson Electronics Technical Support Team with any questions at 866-294-1660
or email: tech@wilsonelectronics.com. Hours: 7 am to 6 pm MST.
Outside
Antenna
Inside Antenna
(Optional
second
antenna for
additional
coverage).
Typical Installation
Advertisement
Table of Contents
