Advertisement
Table of Contents
- 1 Table of Contents
- 2 Package Contents
- 3 Before Getting Started
- 4 Find the Strongest Signal
- 5 Installation Details
- 6 Quick Install
- 7 Outside Antenna Installation
- 8 Signal Booster Installation
- 9 Inside Antenna Installation
- 10 Powering up the Signal Booster
- 11 Troubleshooting & Understanding Lights
- 12 Additional FAQ
- 13 Safety Guidelines & Recommendations
- 14 Signal Booster Specifications
- Download this manual
Advertisement
Table of Contents
Related Manuals for Wilson Electronics DB Pro
Summary of Contents for Wilson Electronics DB Pro
- Page 1 DB Pro ™ Cellular Signal Booster 462105 with Omni Antenna Need help? www.WilsonElectronics.com Tech Support 866-294-1660 Mon.- Fri. Hours: 7 am to 6 pm MST...
-
Page 2: Table Of Contents
FAILURE TO DO THIS WILL VOID YOUR WARRANTY IN THE EVENT OF A POWER SURGE OR LIGHTNING STRIKE. Installation Instructions for the Following Wilson Electronics Signal Booster: DB Pro™ Adjustable Gain 800/1900 MHz In-Building Wireless Smart Technology ™ Signal Booster... -
Page 3: Package Contents
2. Wall mount or Rafter mount - Drill and 3/16 inch bit, Phillips-head screwdriver Before Getting Started Find the Strongest Cellular Signal Before you install your DB Pro and start Before you install your DB Pro signal enjoying improved cellular reception in... -
Page 4: Installation Details
Acceptable method: Check the bar the bar indicator. Go to www. wilsonelectronics.com/test-mode- indicator on your cell phone display instructions for help in finding the and note where the signal appears test mode for your phone. the strongest. (Note: cell phone bars are only an approximation of signal b. -
Page 5: Quick Install
(refer to page 11 for information on protector. The LSP is sold separately (refer lightning protection). to page 11 for more info. If your DB Pro is working correctly, Quick Install the lights will be green. If the lights are orange or red, see the For more detailed instructions on “Troubleshooting”... -
Page 6: Signal Booster Installation
enter the building. Caution: Before drilling Inside Antennas can be mounted holes for the cable, be sure there are above ceiling drywall, on a ceiling no electrical outlets, wiring, or sewer or inside a room, or on a wall inside a water pipes you could puncture or sever. -
Page 7: Troubleshooting & Understanding Lights
You always Support Team for assistance: 866- want the lights to be green. 294-1660. Red indicates the DB Pro has Fixing Orange Light Issues shut down to prevent oscillation If one or both lights on the Signal Booster (feedback). -
Page 8: Additional Faq
Move the Outside Antenna away from the cell tower until lights no longer What hours can I contact tech support? flash. Contact Wilson Electronics Technical Support can be reached Technical Support Team for from 7:00am to 6:00pm MST, by calling assistance. - Page 9 75 Ohm Outside Antenna Kits Kit 301151-0610 • 75 Ohm Dome Antenna Kit 301111-0675 • 10’ RG6 Cable • Yagi Directional Antenna Kit 311135-5820 • 75’ RG6 Cable • 50 Ohm Wall mount Panel Antenna • N-Male to F-Female adapter •...
-
Page 10: Safety Guidelines & Recommendations
Connecting the Signal Booster directly to the cell phone with use of an adapter will damage the cell phone. WARNING: Use only the power supply provided in this package. Use of a non-Wilson Electronics product may damage your equipment. WARNING: The Signal Booster unit is designed for use in an indoor, temperature-controlled environment (less than 150 degrees Fahrenheit). -
Page 11: Signal Booster Specifications
Signal Booster Specifications SIGNALBOOST™ DBPro™ Specifications Model Number 460005 Outside antenna connectors F-Female Outside antenna impedance 75 Ohms Inside antenna connectors F-Female Inside antenna impedance 75 Ohms Dimensions 6.5 x 4.25 x 1.75 inch (16.5 x 10.7 x 4.4 cm) Weight 0.47 lbs (0.213 kg) Frequency... - Page 12 Returned Material Authorization (RMA) number supplied by Wilson Electronics. Wilson Electronics shall, at its option, either repair or replace the product. Wilson Electronics will pay for delivery of the repaired or replaced product back to the original consumer if located within the continental U.S.