Summary of Contents for Wilson Electronics WILSON PRO 4000R
Page 1
A WILSON ELECTRONICS, LLC COMPANY WILSON PRO 4000R In-Building Multi-Antenna Signal Booster With Extended Dynamic Range User Manual wilsonelectronics.com 866.294.1660 NEED HELP?
_____ Index Package Content Key Features Competitive Advantages Installation Diagram Post Install Setup Status Screen Port/Band Status Screens Enable/Disable Ports Safety Guidelines Warranty...
________ Package Content Kit 460231 WilsonPro Wide Band Directional 4 Qty. Dome 4000R Antenna + 75’ Wilson Antenna + 4 Qty. 75’ Wilson 400 2’ Wilson Lightning Surge Protector Kit 460123 WilsonPro Wide Band Directional 4 Qty. Wide Band Panel 4000R Antenna + 75’...
Page 4
_______________ WilsonPro 4000R The WilsonPro 4000R is the first rack mounted, cell booster to incorporate four separate signal amplifiers feeding multiple indoor antennas. The 4000R literally delivers the power of four boosters in a single rack mount unit, and provides cell coverage for up to 100,000 square feet of indoor space, or even more depending on the strength of the incoming signal from the tower.
____________ Key Features Easy rack-mounted installation: The 4000R is intended to fit into an existing server rack. This design allows for a neat and clean installation while leaving the unit easily accessible. Onboard Software for Better Control: Each indoor antenna path is independently and automatically controlled with onboard software, ensuring great connectivity throughout large spaces and multi-story buildings.
___________ Competitive Advantages Highest Downlink Power: Up to +12dB more downlink power than the competition allows for stronger signal in environments where the incoming signal is weak,. The benefit is a stronger signal sent to the inside antennas, providing larger coverage area from a single booster.
__________ Post Install Setup The WilsonPRO 4000R is designed with advanced internal programming, which allows it to automatically adjust for a variety of conditions, while still boosting weak signals. Once the AC power cable and antenna cables are connected, turn the unit on by toggling the power switch located near the AC power receptacle, located at the rear of the unit.
____________ Status Screen After the WilsonPRO splash screen appears for a few seconds, the status screen, showing the amplification status of each port and band, will appear. Status Screen Lights Description A solid green light indicates that a band/port is operating correctly with maximum allowable gain.
Page 10
________ (LIGHTS DESCRIPTION cont.) A solid yellow light indicates band/ port gain has been reduced because of the oscillation condition detected at a nearby band/port. Once the antenna isolation (separation and direction) is corrected at the indicated port(s), the solid yellow light will change to green. A red light indicates a band/port for which has been completely shut down by the amplifier’s internal...
______________ Port/Band Status Screens Green Light By pressing enter on a highlighted light, as shown, a more detailed status screen will be displayed for the highlighted band/port. D-Pad with Enter button Status Screen Close-up This screen provides specific band and port information. Including the strength of the received uplink and downlink signal, status details, and the amplifier gain.
Page 12
___________ (PORT/BAND STATUS SCREENS cont.) Yellow Light Red Slash Pressing enter on a highlighted light with a yellow light with a red slash (Antenna 1, Band 13), as shown, will display the following... D-Pad with Enter button Status Screen Close-up This screen indicates that gain for that band/port has been reduced due to a detected oscillation condition.
Page 13
___________ (PORT/BAND STATUS SCREENS cont.) Yellow Light Pressing enter on a highlighted light with a yellow light with a red slash (Antenna 2, Band 13), as shown, will display the following... D-Pad with Enter button Status Screen Close-up This screen indicates band/port gain has been reduced because of the Indoor Antenna 2 Band 13...
_____________ Enable/Disable Ports To return to the Status Screen press the left arrow button on the D-Pad Unused indoor antenna ports should be enabled/disabled by pressing enter on the applicable port, from the status screen. D-Pad with Enter button Status Screen Close-up ‘Disabled’...
To uphold compliance with network protection standards, all active cellular devices must maintain at least 6 feet of separation distance from Panel and Dome antennas. Use only the power supply provided in this package. Use of a non-Wilson Electronics product may damage your equipment.
Page 16
_________________ Antenna Kit Options The following accessories are certified by the FCC to be used with the Wilson PRO 4000R. Inside Antenna Expansion Kit Kit 301111-5850 Kit 301111-11140 Yagi Directional Antenna Yagi Directional Antenna Kit 309900-50N 50’ RG58 Cable 140’ RG11 Cable...
________ Warranty 2 YEAR WARRANTY WilsonPro Boosters are warranted for two (2) years against defects in workmanship and/or materials. Warranty cases may be resolved by returning the product directly to the reseller with a dated proof of purchase. Signal Boosters may also be returned directly to the manufacturer at the consumer’s expense, with a dated proof of purchase and a Returned Material Authorization (RMA) number supplied by WilsonPro.
Page 19
______ Notes WILSON PRO 4000R IN-BUILDING MULTI-ANTENNA SIGNAL BOOSTER...