High Pressure Hose And Spray Gun Airless; Double Hose And Spray Gun Aircoat - WAGNER SuperFinish 17ex Operating Manual

GB
STARTUP
4.3
HIGH PRESSURE HOSE AND SPRAY GUN
AIRLESS
1. Screw the high pressure hose (9) onto the hose connec-
tion
2. Screw the spray gun (10) onto the high pressure hose
3. Tighten all union nuts on high pressure hose so that no
coating material can escape.
When screwing the high pressure hose to the
hose connection, counter with the 19 mm
wrench.
4. Screw the nozzle holder and selected nozzle to the spray
gun, align and tighten. (See also the instructions for the
spray guns.)
42
4.4

DOUBLE HOSE AND SPRAY GUN AIRCOAT

1. Mount the AirCoat regulator (11) to the SF 17 EX.
Make sure that you do not confuse the connec-
tions for the material hose and air hose on the
gun and the device.
2. Mount the air hose (12) that is part of the double hose to the
AirCoat regulator (11).
10
3. Screw the other end of the air hose (12) to the air entry point
of the gun.
4. Screw the material hose (13) that is part of the double hose
to the material hose connection (14).
5. Screw the other end of the material hose (13) to the material
entry point of the gun.
6. Tighten all the sleeve nuts on the hoses.
When screwing the high pressure hose to the
hose connection, counter with the 19 mm
wrench.
7. Mount the required nozzle. (See also the instructions for the
9
spray guns).
14
11
Super Finish 17ex
11
12
13