WAGNER SuperFinish 17ex Operating Manual page 34

GB
CONTENTS
Contents
1 SAFETY REGULATIONS FOR AIRLESS SPRAYING 35
1.1 Explosion protection _________________________ 35
1.2 Danger of explosion and re from sources of
ignition during spraying work _________________ 35
1.3 Danger of injury from the spray jet _____________ 35
1.4 Secure spray gun against unintended operation __ 35
1.5 Recoil of spray gun __________________________ 35
1.6 Breathing equipment as protection against
solvent vapors ______________________________ 35
1.7 Prevention of occupational illnesses ____________ 35
1.8 Max. operating pressure ______________________ 35
1.9 High-pressure hose _________________________ 36
1.10 Electrostatic charging
(formation of sparks or ames) ________________ 36
1.11 Ventilation when spraying in rooms ____________ 36
1.12 Suction installations _________________________ 36
1.13 Earthing of the object ________________________ 36
1.14 Cleaning the unit with solvents ________________ 36
1.15 Cleaning the unit ___________________________ 36
1.16 Setup on an uneven surface ___________________ 36
2 GENERAL VIEW OF APPLICATION ____________ 37
2.1 Application ________________________________ 37
2.2 Coating material ____________________________ 37
2.2.1 Coating materials with sharp-edged additional
materials __________________________________ 37
2.2.2 Filtering ___________________________________ 37
3. DESCRIPTION OF UNIT _____________________ 38
3.1 Spraying technique __________________________ 38
3.2 Functioning of the unit _______________________ 38
3.3 Explanatory diagram _________________________ 39
3.4 Technical data ______________________________ 40
4 STARTUP _________________________________ 41
4.1 Unit with suction system _____________________ 41
4.2 Unit with upper hopper (5 litres) _______________ 41
4.3 High pressure hose and spray gun (Airless) _______ 42
4.4 Double hose and spray gun (AirCoat) ___________ 42
4.5 Air connection and grounding _________________ 43
4.6 Cleaning preserving agent when starting-up of
operation initially ___________________________ 43
4.7 Taking the unit into operation with
coating material ____________________________ 43
34
5 SPRAYING TECHNOLOGY ___________________ 44
6 HANDLING THE HIGH PRESSURE HOSE _______ 44
7 INTERRUPTION OF WORK ___________________ 44
8 CLEANING THE UNIT _______________________ 45
8.1 Cleaning the unit from the outside _____________ 46
Suction lter _______________________________ 46
8.2
8.3 High-pressure lter __________________________ 46
8.4 Cleaning the Airless spray gun _________________ 47
9 SERVICING ________________________________ 47
9.1 General servicing ___________________________ 47
9.2 High-pressure hose __________________________ 47
10 REPAIRS AT THE UNIT ______________________ 48
10.1 Inlet valve Pusher ___________________________ 48
10.2 Inlet valve _________________________________ 48
10.3 Outlet valve ________________________________ 49
10.4 Pressure control valve ________________________ 49
10.5 Typical wear parts ___________________________ 49
10.6 Remedy in case of faults ______________________ 50
11 SPARE PARTS AND ACCESSORIES ____________ 52
11.1 Super Finish 17ex accessories__________________ 52
11.2 Spare parts list Super Finish 17ex ______________ 56
11.3 Spare parts list high-pressure lter _____________ 58
11.4 Spare parts list suction system ________________ 58
11.5 Spare parts list hopper 5l _____________________ 59
Testing of the unit ________________________________ 60
Important information on product liability_____________ 60
Note on disposal __________________________________ 60
Guarantee declaration _____________________________ 60
CE - declaration__________________________________ 122
European service network _________________________ 124
Super Finish 17ex