WAGNER SuperFinish 17ex Operating Manual page 61

Super Finish 17ex
3. Handling
If defects can be seen in the materials, processing or perfor-
mance of the device during the guarantee period, guarantee
claims must be made immediately, or at the latest within a pe-
riod of 2 weeks.
The authorised specialist shop that delivered the device is en-
titled to accept guarantee claims. Guarantee claims may also
be made to the service centres named in our operating instruc-
tions. The product has to be sent without charge or presented
together with the original purchase document that includes
details of the purchase date and the name of the product. In
order to claim for an extension to the guarantee, the guarantee
certi cate must be included.
The costs as well as the risk of loss or damage to the product
in transit or by the centre that accepts the guarantee claims or
who delivers the repaired product, are the responsibility of the
customer.
4. Exclusion of guarantee
Guarantee claims cannot be considered
-
for parts that are subject to wear and tear due to use or other
natural wear and tear, as well as defects in the product that
are a result of natural wear and tear, or wear and tear due to
use. This includes in particular cables, valves, packaging, jets,
cylinders, pistons, means-carrying housing components, lters,
pipes, seals, rotors, stators, etc. Damage due to wear and tear
that is caused in particular by sanded coating materials, such as
dispersions, plaster, putty, adhesives, glazes, quartz foundation.
-
in the event of errors in devices that are due to non-compliance
with the operating instructions, unsuitable or unprofessional
use, incorrect assembly and/or commissioning by the buyer or
by a third party, or utilisation other than is intended, abnormal
ambient conditions, unsuitable coating materials, unsuitable
operating conditions, operation with the incorrect mains voltage
supply/frequency, over-operation or defective servicing or care
and/or cleaning.
-
for errors in the device that have been caused by using accessory
parts, additional components or spare parts that are not original
Wagner parts.
-
for products to which modi cations or additions have been
carried out.
-
for products where the serial number has been removed or is
illegible
-
for products to which attempts at repairs have been carried out
by unauthorised persons.
-
for products with slight deviations from the target properties,
which are negligible with regard to the value and usability of
the device.
-
for products that have been partially or fully taken apart.
5. Additional regulations.
The above guarantees apply exclusively to products that have
been bought by authorised specialist shops in the EU, CIS, Aus-
tralia and are used within the reference country.
If the check shows that the case is not a guarantee case, repairs
are carried out at the expense of the buyer.
The above regulations manage the legal relationship to us
concludingly. Additional claims, in particular for damages and
losses of any type, which occur as a result of the product or
its use, are excluded from the product liability act except with
regard to the area of application.
Claims for liability for defects to the specialist trader remain
una ected.
German law applies to this guarantee. The contractual lan-
guage is German. In the event that the meaning of the German
and a foreign text of this guarantee deviate from one another,
the meaning of the German text has priority.
J. Wagner GmbH
Division Professional Finishing
Otto Lilienthal Strasse 18
88677 Markdorf
Federal Republic of Germany
Subject to modi cations ∙ Printed in Germany
GB
GUARANTEE DECLARATION
61