Startup; Unit With Suction System; Unit With Upper Hopper 5 Litres - WAGNER SuperFinish 17ex Operating Manual

Super Finish 17ex
4

STARTUP

4.1

UNIT WITH SUCTION SYSTEM

1. Take the cap o the coating material input point (4).
2. Ensure that the sealing surfaces of the connections are
clean.
Ensure that the red inlet (1) is inserted in the coating mate-
rial inlet (4).
3. Use the enclosed 41 mm wrench to screw the union nut (2)
at the suction tube (3) onto the coating material inlet (4) and
tighten it.
4. Screw the union nut (5) at the return hose (6) to the connec-
tion (7) (22mm).
6
5
7
4.2
1. Take the cap o the coating material input point (4)
2. Ensure that the sealing surfaces of the connections are
clean. Ensure that the red inlet (1) is inserted in the coat-
ing material inlet (4).
3. Screw the union nut (5) on the return pipe (6) onto the
connection (7).
4. Screw the upper hopper (8) onto the coating material inlet
(4).
3
2
1
4

UNIT WITH UPPER HOPPER 5 LITRES

6
5
7
GB
STARTUP
8
1
4
41