Factory Reset - Barco UDM-4K15-NL User Manual

• Vertical lens shift
• Zoom
2. To enable/disable a feature, click on the slider and drag it to the left to disable the feature or the right to
enable the feature.
When enabled, the slider becomes blue; when disabled, the slider is gray.

10.12 Factory reset

What can be done?
All settings and values on the projector can be reset to its default values. This can be done for one or more
settings separately, or all settings together (factory reset).
Factory settings
The following settings are the default factory settings:
Option
DMX
GSM
Illumination
Image blend
Image connectors
Image convergence
Image display
Image features
Image Orientation
Image RealColor P7
Image Resolution
Image Source
Image 3D
Setting
DMX Mode
Start Channel
Power
Blend/Mask size
Black Level
Black Level Files
Blend Files
Color Space
Signal Range
Electronic Convergence
Display mode
Contrast
Brightness
Saturation
Sharpness
Gamma
Cropping
Aspect Ratio
Scaling
Orientation
P7 Realcolor
Output Resolution (if applicable)
Source files
Sync delay
Swap eye
GUI – System Settings
Factory setting
Basic
1
100%
Disabled, all value to zero
Disabled, all files deleted
auto
auto
All values to zero
AutoStereo
mid value
mid value
mid value
mid value
mid value
Off
16:9
Fill Aspect ratio
Table, Front
all set to native
4K UHD
Standard
0 µs
Off
R5911443 /03 UDM 137