Table of Contents
Advertisement
B
O
ASIC
PERATIONS
U
GXW V
NDERSTANDING
GXW40XX has a built-in voice prompt menu for simple device configuration. To enter the voice prompt
menu, press *** on the standard analog phone connected to any FXS port.
T
5: D
ABLE
EFINITIONS OF THE
Menu
Voice Prompt
"Enter a Menu Option"
Main Menu
"DHCP Mode", "PPPoE
01
Mode "or "Static IP Mode"
"IP Address " + IP address
02
"Subnet " + IP address
03
"Gateway " + IP address
04
"DNS Server " + IP address
05
Preferred Vocoder
07
"MAC Address"
10
WAN Port Web Access
12
Firmware Server IP
13
Address
Configuration Server IP
14
Address
Upgrade Protocol
15
Firmware Version
16
Firmware Upgrade
17
"Direct IP Calling"
47
Phone calls between
71-78
different ports of the same
GW 400x
Phone calls between
701-724
different ports of the same
GW4024
Voice Mail
86
"RESET"
99
Grandstream Networks, Inc.
P
OICE
ROMPTS
GXW V
P
OICE
ROMPTS
User's Options
Enter "*" for the next menu option
Enter "#" to return to the main menu
Enter 01 – 05, 07,10 - 17, 47, 86 or 99 Menu option
Enter '9' to toggle the selection
If user selects "Static IP Mode", user need configure all the IP
address information through menu 02 to 05. If user selects
"Dynamic IP Mode", the device will retrieve all IP address
information from DHCP server automatically when user reboots
the device.
The current WAN IP address is announced
Enter 12-digit new IP address if in Static IP Mode.
Same as Menu option 02
Same as Menu option 02
Same as Menu option 02
Enter "9" to go to the next selection in the list:
PCM U
PCM A
iLBC
G-726
G-723
G-729
Announces the Mac address of the unit.
Enter "9" to toggle between enabled and disabled
Announces current F irmware Server IP address. Enter 12 digit
new IP address.
Announces current Config Server Path IP address. Enter 12 digit
new IP address.
Upgrade protocol for firm ware and configuration update. Enter
"9" to toggle between TFTP and HTTP
Firmware version information.
Firmware upgrade mode. Enter "9" to rotate among the following
three options:
1.
always check
2.
check when pre/suffix changes
3.
never upgrade
Enter the targ et IP address to make a d irect IP call, after dia l
tone. (See "Make a Direct IP Call".)
Applies to GXW 4004/GXW4008. User c an make intern al calls
between different ports inside the same GW even without being
registered to S IP server. B y dialing *** and 7x user can reach
colleague connected to port "x".
Applies to GXW 4024. User can make inte rnal calls bet ween
different ports inside the same GW even without being registered
to SIP server. B y dialing *** and 7xx us er can reac h colleague
connected to port "xx".
Number of voice mails
Enter "9" to reboot the device; or
GXW40XX User Manual
Firmware 1.0.5.10
Page 12 of 40
Last Updated: 01/2012
Advertisement
Table of Contents
