Rompt - Grandstream Networks GXW40 series User Manual

Analog ip gateway 4, 8 or 24 fxs ports.

Hide thumbs Also See for GXW40 series:

Provisioning manual (5 pages)

User manual (38 pages)

Table Of Contents

Table of Contents

DHCP hostname

DHCP domain

DHCP vendor class ID

PPPoE account ID

PPPoE password

PPPoE Service Name

Time Zone

Self Defined Time Zone

Language

Device Mode

NAT maximum ports

NAT TCP timeout

NAT UDP timeout

Uplink Bandwidth

Downlink Bandwidth

Enable UPnP support

Grandstream Networks, Inc.

This option s pecifies the name of the cl ient. This field is optional but may be

required by some Internet Service Providers. Default is blank.

This option specifi es the domain name that client sh ould use when resolving

hostnames via the Domain Name System. Default is blank.

Used by clients and s ervers to e xchange vendor-specific information. Default is

HT500.

PPPoE username. Necessary if ISP requir es you to use a PPPoE (Poi nt to Point

Protocol over Ethernet) connection.

PPPoE account password.

This field is optiona l. If y our ISP us es a ser vice name for the PPPoE co nnection,

enter the service name here. Default is blank.

Controls how the date/time is displayed according to the specified time zone.

The syntax is std offset dst [offset],start[/time],end[/time]

Default is set to : MTZ+6MDT+5,M3.2.0,M11.1.0

MTZ+6MDT+5,

It indicates a time zone with 6 hours offset with 1 hour ahead which is the US

central time.

It is positive (+) if the local time zone is west of the Prime Meridian and negative

(-) if it is east.

Prime Meridian (International or Greenwich Meridian)

M3.2.0,M11.1.0

The 1st number indicates Month: 1,2,3,..,12 (for Jan, Feb, .., Dec)

The 2nd number indicates the nth iteration of the weekday: (1st Sunday, 3rd

Tuesday etc)

The 3rd number indicates Weekday: 0,1, 2, ..,6(for Sun, Mon, Tue, .., Sat)

Therefore, this example is the DST which starts from the second Sunday of

March to the 1st Sunday of November.

Default is English. Languages supported with voice prompt.

This parameter controls whether the device is working in NAT router mode or Bridge

mode. Save the setting and reboot prior to configuring the GXW.