Configuration Of The Process Values - Burkert 8750 Quick Start Manual

PROFIBUSDPstart-up
BUS.COMM
Address X
ENTER
INPUT
OK
BUS FAIL
ENTER
EXIT
BUS PDI
ENTER
EXIT
Fig. 22: Operating structure BUS.COMM - 1
Typ 8750
+
Input device
Enter
address.
value
–
Adjustment
13)
range: 0 ... 126
SELEC
Start up of
SafePos off
the safety
SafePos on
position
SELEC
Process
Position
values
CMD
which are
transferred
Process value
to the
Setpoint
controller
Temperature
Operation mode
Errors
F.CONTRL active
BUS PDO
ENTER
EXIT
EXIT
Fig. 23: Operating structure BUS.COMM - 2
ESC
If you press the key MENU , the value remains unchanged.
13)
13.2 Configuration of the process values
The following components are required for the configuration:
• Software suitable for the configuration. For example Step7 from
Siemens.
• GSD file (Download from the Bürkert homepage)
For more detailed information see supplementary instructions on the
Bürkert homepage:
• "Configuration on the PROFIBUS by means of GSD file"
www.burkert.com → Type 8793 → Config. PROFIBUS by GSD file
→
First input the PDI (Process Data Input).
PDI: Process Data Input (from the process controller to the controller)
english
SELEC
Process
Setpoint
values
Operation mode
which are
transferred
Error reset
from the
F.CONTRL active
controller
39