Contact Information; Manufacturing Date - ALLIANCE BA120E Installation Manual

Introduction

Contact Information

If service is required, contact the nearest Factory Authorized
Service Center.
If you are unable to locate an authorized service center or are un-
satisfied with the service performed on your unit, contact the
source from which you purchased your unit.
When calling or writing about your unit, PLEASE GIVE THE
MODEL AND SERIAL NUMBERS. The model and serial num-
bers are located on the serial plate. The serial plate will be in the
location shown in Figure 1 .
Date Purchased ______________________________
Model Number ______________________________
Serial Number _______________________________
NOTE: An alternate serial plate is located on the front of the machine on the inside of the loading door hinge.
1. Serial Plate

Manufacturing Date

The manufacturing date for your unit can be found on the serial
number. The first two digits indicate the year. The third and
fourth digits indicate the month. For example, a unit with serial
number 1505000001 was manufactured in May 2015.
©
Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
1
120
Figure 1
Please include a copy of your bill of sale and any service receipts
you have.
To reduce the risk of serious injury or death, DO NOT
repair or replace any part of the unit or attempt any
servicing unless specifically recommended in the
user-maintenance instructions or in published user-
repair instructions that you understand and have the
skills to carry out.
If replacement parts are required, contact the source from where
you purchased your unit.
170/200
12
WARNING
1
TMB2427N_SVG
Part No. 70532501ENR7
W329