Table of Contents
Advertisement
Converting the base
Spares kits are available to convert the head from ball base to flat base versions and vice versa.
Kit 3525-900SP comprises a ball base, bowl clamp and fixing hardware; while kit 3525-901SP has
a flat base, mounting bolts, and washers, a spanner and fixing hardware.
To change the base:
Remove the camera from the head.
On the base, remove four screws
Position the replacement base on the head and secure with four screws (17.1), using Loc-
tite 222E.
Brake knob and drag control knob adjustment
The pan and tilt brake and drag controls may require adjustment after prolonged use. These ad-
justments should be carried out by competent persons as detailed in the Maintenance Manual.
The Maintenance Manual may be obtained from Vinten Broadcast Limited or your local Vinten dis-
tributor or from our website at www.vinten.com.
(17.1)
and separate the base
Converting the base
(17)
from the head.
(17)
(17.1)
17
Advertisement
Table of Contents
