Setting The Closing Speed - RADEMACHER RolloSystems T2 Instruction Manual

Setting the closing speed

Keys
Manual setting of the closing speed.
1.
Press for two
OK
seconds
2.
/
3.
OK
4.
/
5.
OK
30
Automatic setting of the closing speed, depending on the type of mounting
selected.
If automatic speed setting by selecting the type of mounting has been activated, the closing
speed is permanently set (depending on which type of mounting has been selected). In this
case it is not possible to set the closing speed separately.
Conditions for manually setting the closing speed.
If manual selection of the opening speed has been activated, it is also possible to manually set
the closing speed.
IMPORTANT
Repeating the end point search and reference runs.
Every time the closing speed is altered the end points, as well as the reference run settings, are
automatically deleted and must be repeated without fail (see page 22/23).
Extending the braking distance.
When the closing speed has been increased it may be necessary to extend the braking distance
in order to ensure smooth operation (see page 25).
LED display
. . .
Call up the menu.
Select function „Closing speed".
Confirm selection .
The current speed value is shown and flashes (e.g. ).
Set the required closing speed.
= slow speed
= high speed
Return to menu.
GB