Setting The Sensitivity Of Obstacle Detection - RADEMACHER RolloSystems T2 Instruction Manual

Setting the sensitivity of obstacle detection

Keys
1.
Press for two
OK
seconds
2.
/
3.
OK
4.
/
5.
OK
26
With this function you can set the level of sensitivity for triggering obstacle detection.
Description
high sensitivity
low sensitivity
factory setting
IMPORTANT
When using the drive outside, you should set the sensitivity low enough
not disrupt normal operation.
LED displays
. . .
Setting
=
=
=
Call up the menu.
Select function
obstacle detection".
Confirm selection
The current level of sensitivity is shown and flashes.
Set the required level of sensitivity.
= high sensitivity
= low sensitivity
= factory setting
= external use
Return to menu.
GB
that frost and wind do
„Sensitivity of
.