Obstacle Detection; Manual Decoupling - RADEMACHER RolloSystems T2 Instruction Manual

i
Functional description / Obstacle detection
i
Functional description / Manual decoupling
10
The drive features an automatic obstacle detection sensor.
If the sliding unit should encounter an obstacle when opening or closing, the drive stops automatically
and travels approx. 30 cm in the opposite direction.
Display as soon as an obstacle is identified.
NOTE
In certain circumstances, the obstacle detection sensor may incorrectly identify an obstacle, in
which case proceed as detailed on page 42.
The RolloSystems T2 has a manual decoupling function.
In the event of a malfunction (e.g. power failure) the sliding unit can be decoupled from the drive
and moved by hand by giving it a hefty push. To recouple the sliding unit it has to be brought back
into position in relation to the toothed belt connector. When correctly positioned the follower will
clearly latch into the toothed belt connector.
GB
Click