Drive Menu Structure; Calling Up Functions / Setting Assistance / Operation - RADEMACHER RolloSystems T2 Instruction Manual

Drive menu structure

Calling up functions / Setting assistance / Operation

All necessary settings can be made in the drive control menu. Functions are selected via the
menu. The following table gives a brief introduction to the individual functions:
End point search
Reverse running direction
Set braking distance
Set sensitivity
Set mounting mode / opening speed
Set closing speed
Set automatic closing
Acoustic signal
Push mode
/
Set function of control inputs
Clear (restore factory settings)
Activate radio motion detector
Activate/deactivate manual transmitter
The drive has three operating keys and an LED display. All functions can be accessed and the
required settings made using the operating keys. The LED display provides information on the
function selected and the status of the function.
Plus key
OK key
OK
Minus key
A and B
GB
LED display
19