Calling Up The Menu And Selecting A Function (Example) - RADEMACHER RolloSystems T2 Instruction Manual

Calling up the menu and selecting a function (Example)

Keys
1.
2. Press for two
OK
seconds
3.
/
4.
OK
5.
/
6.
OK
7. Press for two
OK
seconds
20
LED display
Display after plugging the power unit
into a 230 V socket.
The drive is idle (in standby mode).
Call up the menu.
Select a function.
e.g. „Function of control input A
Confirm the selection and switch to
setting mode.
The display flashes.
Set the required function.
e.g. (closer contact, NC)
Return to menu.
Exit the menu.
The drive then returns to idle.
NOTE
If no key is pressed for 30 seconds, the drive auto-
matically returns to idle mode.
Changes to settings are nevertheless saved.
GB
"