Switching To Automatic Speed Setting According To The Type Of Mounting - RADEMACHER RolloSystems T2 Instruction Manual

2. Switching to manual setting of the opening speed
Keys
5.
/
6.
OK

3. Switching to automatic speed setting according to the type of mounting

Keys
1. Press for two
OK
seconds
2.
/
3.
OK
4.
+
Press for three seconds
simultaneously
5.
/
6.
OK
LED display
. . .
LED display
+
. . .
Set the required opening speed.
= slow speed
= high speed
Return to menu.
NOTE
Subsequently the closing speed can be
set in menu item 6 (see page 30).
Call up the menu.
Select function „Mounting type".
Confirm selection .
The current speed is shown and flashes (e.g. 4)
Switch to manual setting of opening
speed.
A signal sounds and the current type of mounting is
shownand flashes (e.g. 2).
Set the required type of mounting.
= The sliding unit runs into the wall.
= The sliding unit is mounted on the wall
(factory setting).
Return to menu.
GB
29