Switching Push Mode On/Off - RADEMACHER RolloSystems T2 Instruction Manual

Switching Push mode on/off

Keys
1.
Press for two
OK
seconds
2.
/
3.
OK
4.
/
5.
OK
When the sliding unit is mechanically moved, the drive travels in the corresponding direction. It
takes significant force to move the sliding unit, therefore this should not be the usual method of
operation.
IMPORTANT
If the sliding door/sliding shutter is fitted with a mechanical coupling this can be decoupled when
the sliding unit is pushed before the drive recognises the manual movement. In this case the Push
mode does not function.
LED display
. . .
Call up the menu.
Select function „Push mode".
Confirm selection .
The current status of the function is shown and flashes.
Set the required function.
= Push mode off.
= Push mode on (factory setting).
Return to menu.
GB
33