Correct Usage; Permissible Sliding Doors / Sliding Shutters; Operating Conditions - RADEMACHER RolloSystems T2 Instruction Manual

i

Correct usage

i

Permissible sliding doors / sliding shutters

i

Operating conditions

6
Use the RolloSystems T2 exclusively:
To open and close sliding doors and sliding shutters of the respective permissible maximum
weight, in private households.
According to the information and security requirements given in this manual.
Any other usage would be regarded as improper use.
Single-wing or double-wing sliding doors with a maximum weight of 80 kg.
The sliding door or sliding shutter fittings must correspond to DIN 1527 load class 6 (length
of useful life) and load class 3 (initial friction).
An easily accessible 230 V/50 Hz socket must be available at the installation site.
Only install the mains power adapter in dry rooms.
It should be possible to easily open and close the sliding door or sliding shutter by hand, the
door or shutter should not stick, and must be installed horizontally.
The sliding door or sliding shutter must be of a design with solid (fixed, immovable) end
stops.
GB