Activating/Deactivating A Radio Motion Detector - RADEMACHER RolloSystems T2 Instruction Manual

Activating/deactivating a radio motion detector

Keys
Activating a radio motion detector
1.
Press for two
OK
seconds
2.
/
3.
OK
4.
5.
6.
OK
38
If required you can also control the drive with a radio motion detector.
IMPORTANT
Only one motion detector channel can be activated.
Before being activated, any additional motion detectors must be set to the same radio code
as the first radio motion detector (see the operating instructions for the respective radio
motion detector).
Also refer to the installation and operating instructions for the radio motion
detector .
LED display
Call up the menu.
Select function „Activate radio
motion detector".
Confirm selection .
The current status of the function is shown and flashes.
= No radio motion detector is yet activated.
Insert batteries into the radio motion
detector.
Please refer to the operating instructions for the
motion detector in question.
When activation is successful the
display changes
= A radio motion detector is activated.
Return to menu.
GB