General Safety Instructions - RADEMACHER RolloSystems T2 Instruction Manual

i

General safety instructions

8
Work on electrical systems entails the risk of fatal electric shock.
Always remove the mains power adapter from the socket before carrying out any work on
the RolloSystems T2 or on the sliding door or sliding shutter.
The use of defective equipment can lead to personal injury and damage to
property.
Never use defective or damaged equipment.
Check that the drive and power unit are intact.
Please contact our Customer Service (see page 48) should you discover damage to the
system.
With power-driven sliding doors/sliding shutters there is a risk of injury through
crushing or cutting of a limb at the closing edges.
Please ensure that no one remains in the range of motion of the sliding door/sliding
shutter during operation.
Incorrect use leads to an increased risk of injury.
Never reach into moving sliding doors/sliding shutters or into actuated components.
Brief all parties involved in how to use the system safely.
Keep children away from travelling sliding doors/sliding shutters whenever these are in
movement.
Forbid children from playing with the sliding door or sliding shutter, or with the external
controls.
Keep remote controls somewhere that prevents them being used accidentally, e.g. by children
playing.
Only pass through sliding doors/sliding shutters when they are fully open and at a standstill.
If safety attachments are defective or out of operation there is a risk of injury
or damage to property.
Set the speed according to the type of mounting.
Keep the path of travel free of foreign bodies, (e.g. ice, snow, dirt and stones).
GB