ESAB A2 Instruction Manual page 49

8 CONFIGURATION MENU
Example, I/O OFF
WELD HEAD OFFSET
•
Press Start, for welding head 1 and welding head 2 at the same time.
• Welding head 1 starts to weld.
• Welding head 2 starts to weld first when the start position for welding head 1 has been
reached (the distance given WELD HEAD OFFSET).
•
Press stop, for welding head 1 and welding head 2 at the same time.
• Welding head 1 stops welding but travel motion continues.
• Welding head 2 stops welding when it has reached the point where equipment1 stopped
welding (the distance that is given in WELD HEAD OFFSET).
• Welding is complete.
0460 949 274
Welding head 2 (slave)
TAIL
- 49 -
Welding head 1 (master)
HEAD
© ESAB AB 2015