Attaching Grips And Fixtures - Mecmesin OmniTest-5.0 Operation And Installation Manual

3.9 Attaching Grips and Fixtures

For flexible attachment of a variety of accessories and improved alignment, the OmniTest-5.0
is fitted with an anvil plate to accept fixtures with different screw threads.
This is attached with four bolts using an Allen key. For alignment, the anvil plate can be
loosened, moved forwards or back, and the bolts retightened.
 Anvil plate complete located at the base of the OmniTest-5.0
Upper grips and accessories are attached directly to the ELS device being used.
QC adapters are available and can be fitted directly to the anvil plate or through a Mecmesin
LTE-700 extensometer.
Mecmesin  11
OmniTest-5.0 Operating Manual