Re-Enable Interlocking Output (H9/C5) - Panasonic EBL512 Operating Instructions Manual

Panasonic Eco Solutions Nordic AB
MEW01457
32.5
Action
"Access"
Scroll to menu H9.
"A"
Scroll to menu C5.
"A"
"A"
or
"Return"
Rev: - Operating Instructions Fire alarm system EBL512, V2.7.x

Re-enable interlocking output (H9/C5)

Disabled interlocking outputs are listed in menu H4/U1 from which it
is also possible to get a print-out.
Interlocking outputs (Type = Interlocking) can be re-enabled via this
menu but not via menu H2/B6.
If "000/00" is entered, all interlocking outputs, disabled via menu
H9/C4 and "000/00", will be re-enabled at the same time.
Text in display
Interlocking outputs and inputs
Activated interlocking outputs/inputs
Re-enable interlocking output
Re-enable interlocking output
area 000 point 00
Re-enable interlocking output
ACCEPT? H9
ACCEPT? C1
ACCEPT? C5
ACCEPT?
ACCEPT? C5
159
Comments
According to chapter
"Access", see page 92.
This is a list in which you
can scroll. If there are no
disabled outputs, menu C5
will be shown again.
Press "A" (for re-enable)
or "Return" (not re-enable)
to menu C5.
Scroll or press "Return" to
menu H9. Scroll or press
"Return" to log off.