Change Access Code For Maintenance (H8/S11) - Panasonic EBL512 Operating Instructions Manual

Panasonic Eco Solutions Nordic AB
MEW01457
31.12
Action
"Access"
Scroll to menu S9.
"A"
Enter the old code, the
new code and the new
code again.
Rev: - Operating Instructions Fire alarm system EBL512, V2.7.x
Change access code for maintenance
(H8/S11)
For security reasons, the default code should be changed.
Text in display
Change access code for maintenance
Access code: _
New code:
Access code: ****
New code: ****
Incorrect access code, NO change
Change access code for maintenance
NOTE! After change of access code it is recommended do a "Safe
shutdown of the control unit" (see menu H8/S8). This will save the
SSW data (e.g. the new code) in a Flash ROM (see page 88).
If the valid access code is unknown a "back door code" is available.
ACCEPT? S11
Verify:
Verify: ****
ACCEPT? S11
154
Comments
According to chapter
"Access code for
maintenance", see page
141.
The digits are replaced
(****) in the display.
The code was not correct.
Try again.
The code was correct and
is now changed to the new
code. Scroll or press
"Return" to menu H8.
Scroll or press "Return" to
log off.