Activate Interlocking Output (H9/C2) - Panasonic EBL512 Operating Instructions Manual

Panasonic Eco Solutions Nordic AB
MEW01457
32.2
Action
"Access"
Scroll to menu H9.
"A"
Scroll to menu C2.
"A"
Write the area and point,
e.g.:
"A"
Rev: - Operating Instructions Fire alarm system EBL512, V2.7.x

Activate interlocking output (H9/C2)

The output in each interlocking combination (area / point) can be
manually activated via this menu. The corresponding interlocking
input will be "monitored" in the same way as if the output was
activated by its control expression.
Reset has to be performed via menu H9/C3.
Text in display
Interlocking outputs and inputs
Activated interlocking outputs/inputs
Activate interlocking output
Activate interlocking output
area 000 point 00
Activate interlocking output
area 001 point 01
Activate interlocking output
ACCEPT? H9
ACCEPT? C1
ACCEPT? C2
ACCEPT?
ACCEPT?
ACCEPT? C2
156
Comments
According to chapter
"Access", see page 92.
Press "A" to accept and/or
"Return" to menu C2.
Scroll or press "Return" to
menu H9. Scroll or press
"Return" to log off.