Configuration (H4/U8) - Panasonic EBL512 Operating Instructions Manual

Panasonic Eco Solutions Nordic AB
MEW01457
27.8
Action
"Access"
Scroll to menu H4.
"A"
Scroll to menu U8.
"A"
"Return"
Rev: - Operating Instructions Fire alarm system EBL512, V2.7.x

Configuration (H4/U8)

In a control unit the menu H4/U8 can be used to see the following
settings (made in Win512, "Tools" menu) for that specific control
unit:
Number of addresses that can be used, i.e. xxx = 128, 256 or 512 (set
in "EBL512 settings" dialog box).
Language The language for texts presented in the alphanumeric
display / print-outs. Language file (nnnn.SST) to be downloaded is
selected (in "Download software..." dialog box)
Convention Different countries have different conventions, i.e.
country specific functions, etc. The convention is set (changed) via
Win512, menu Tools | Settings...("Win512 Settings" dialog box).
It is not possible to get a print-out from this menu.
Text in display
Present system status on display and
printer
Disablement
Printout: (1=yes)
Show configuration
Max number of allowed loop units xxx
Language:nnnnnnnnnn Conv.:cccccccccc
Show configuration
103
To set (change) the convention in Win512, Level 2 has to be selected and
a password is required.
ACCEPT? H4
124
103
Comments
According to chapter
"Access", see page 92.
U1
Press "A" to accept.
U8
Press "Return" to menu
U8.
Scroll or press "Return"
U8
to menu H4. Scroll or
press "Return" to log off.