Disablement By Time Channel (H4/U2) - Panasonic EBL512 Operating Instructions Manual

Panasonic Eco Solutions Nordic AB
MEW01457
27.2
Action
"Access"
Scroll to menu H4.
"A"
Scroll to menu U2.
"A"
or
"1"
"Return"
When scrolling in the list the message "No more zone/addresses disabled by time channel found in the
system" can be shown.
Rev: - Operating Instructions Fire alarm system EBL512, V2.7.x

Disablement by time channel (H4/U2)

A list of all disablements by time channel(s) in the system. From this
menu, it is also possible to get a print-out.
NOTE! Other disablements are listed in menu H4/U1.
Text in display
Present system status on display and
printer
Disablement
Printout: (1=yes)
Disablement by time channel
Printout: (1=yes)
When "A" is pressed, the disablements will be shown in the
display, e.g:
Zone XXX address XX disabled
(by time channel)
Printing started. To stop printing press
C and 0 simultaneously
Disablement by time channel
Printout: (1=yes)
ACCEPT? H4
ACCEPT?
111
Comments
According to chapter
"Access", see page 92.
U1
Press "1" for an automatic
U2
print-out of all
disablements in the
system.
Press "A" for presentation
in the display.
L = a list in which you can
scroll. If there are no
disablements and if
"Return" is pressed, menu
L
U2 will be shown again.
Press "A" and menu U2
will be shown again.
Scroll or press "Return" to
U2
menu H4. Scroll or press
"Return" to log off.