Optimizing the Compound Signal
Performing Compound Optimization Animation
Setting Up for Compound Optimization
Thermo Scientific
You can increase the signal from your analyte, by using the Optimization pane in Tune to
optimize the MS parameters.
1. Go to
thermofisher.com.
2. In the search field, type TSQ Altis, TSQ Quantis, or TSQ Fortis.
3. Click the Catalog tab and then the instrument name.
4. Scroll down until you see the Product overview, Videos, and Documents tab.
5. Click the Videos tab and on the right, click Performing compound optimization.
You optimize the signal of the compound with the LC conditions used to analyze it. This is a
high-flow infusion technique, in which a Tee union directs the analyte from the syringe pump
into an LC flow.
For plumbing instructions see
Appendix D, "Setting Up Sample Introduction Techniques."
"Setting Up High-Flow Infusion Without an Autosampler,"
TSQ Altis, Quantis, and Fortis Hardware Manual
16
in
67