Local Upgrade; Backup And Restore Configuration Settings - TP-Link Archer AC1900 User Manual

Chapter 13
3. Wait a few minutes for the upgrade and reboot to complete.
Tips: If there's a new and important firmware update for your router, you will see the prompt notification on your
computer as long as a web browser is opened. Click UPGRADE, and log in to the web management page with the
username and password you set for the router. You will see the
13 1 3

Local Upgrade

1. Download the latest firmware file for the router from www.tp-link.com.
2. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for
the router.
3. Go to Advanced >
4. Focus on the Local Upgrade
firmware file, and click UPGRADE.
5. Wait a few minutes for the upgrade and reboot to complete.
Note: If you fail to upgrade the firmware for the router, please contact our
13 2

Backup and Restore Configuration Settings

The configuration settings are stored as a configuration file in the router. You can
backup the configuration file to your computer for future use and restore the router to
a previous settings from the backup file when needed. Moreover, if necessary you can
erase the current settings and reset the router to the default factory settings.
System > Firmware Upgrade.
section. Click
Firmware Upgrade page.
BROWSE to locate the downloaded new
Technical Support.
Manage the Router
71