Diagnostic - TP-Link TL-WR845N Manual

Chapter 4
3. Select your local time
4. Enter the Date in Month/Day/Year format.
5. Enter the Time in Hour/Minute/Second format.
6. Click Save.
¾ To set time automatically:
7. Select your local time
8. Enter the address or domain of the
9. Click Get GMT to get time from the Internet if you have connected to the Internet.
¾ To set Daylight Saving Time:
1. Select Enable DaylightSaving.
2. Select the start time from the drop-down list in the
3. Select the end time from the drop-down list in the
4. Click Save.
Note:
This setting will be used for some time-based functions such as firewall. You must specify your time zone once you log
in to the router successfully; otherwise, time-based functions will not take effect.

4. 16. 2. Diagnostic

Diagnostic is used to test the connectivity between the router and the host or other
network devices.
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the router.
2. Go to System Tools
zone.
zone.
NTP Server I
> Diagnostic.
or NTP Server II.
Start field.
End field.
64