Factory Defaults; Backup And Restore - TP-Link MR5-WR542G User Manual

4.12.3 Factory Defaults

This page (shown in Figure 4-57) allows you to restore the factory default settings for the router.
Click the Restore button to reset all configuration settings to their default values.
•
The default User Name: admin
•
The default Password: admin
•
The default IP Address: 192.168.1.1
•
The default Subnet Mask: 255.255.255.0
Note: Any settings you have saved will be lost when the default settings are restored.

4.12.4 Backup and Restore

This page (shown in Figure 4-58) allows you to save current configuration of router as backup or restore
the configuration file you saved before.
Click the Backup button to save all configuration settings as a backup file in your local computer.
To restore the router's configuration, follow these instructions:
•
Click the Browse button to select the backup file which you want to restore.
•
Click the Restore button.
Note: The current configuration will be covered with the uploading configuration file. The restoration
process lasts for 20 seconds and the router will restart automatically. Keep the router on during the
restoring process, to prevent any damage.
MR5-WR542G
Figure 4-57 Restore Factory Default
Figure 4-58 Backup and Restore Configuration
54Mbps Wireless Router User Guide
63