Reversal - Ingenico ICT220 User Manual

At the end of the transaction the terminal asks for confirmation for printing of the second
receipt.
When the red button is pressed the buyer's receipt is not printed.
The transaction is complete.
Notes:

The transaction can be interrupted by pressing the RED button.

In case of an error in entering the sum and the card number, corrections can be made using the YELLOW button.

In order to enter letters, press and hold the respective key until the required letter appears.
Example: Where it is necessary to type 00001N, simply type 00001 and then hold number 6 until the letter N appears on the
screen.
2.3

REVERSAL

In order to reverse the transaction, do the following:
The terminal is in the standby mode.
Press F1 key
From the menu select "Reversal" (to navigate through the menu
use ▼ ▲ keys or F2 and F3 keys) and then press the green key
(ENTER) to confirm.
Enter the number of the receipt that you wish to reverse and then
press the green key (ENTER).
Where the receipt number is not entered, the terminal shall
reverse the last transaction.
The terminal shall request confirmation for the reversal.
To continue press <Taip> or the green key (ENTER).
To cancel press <Ne> or the red key (CANCEL)
The chip card must be inserted in the PINPAD reader.
Remove the card from the reader.
ACTION PINPAD
Sveiki
Prašome palaukti
Prašome palaukti
Prašome palaukti
Pateikite kortelę
-3,19 EUR
Kortelė tinka
Išimkite kortelę
6
Paimkite kvitą
is nusp. klavišą
TERMINAL
Sveiki
Operacijos
1-Siųsti
2-Anuliuoti
3-Kortelės operac
4-Rankin įvedimas
Anuliavimas
Kvito Nr. Nr:
-
Anuliuoti?
PAN:************0001
Suma: 3.19 EUR
Oper. Nr. 00001N
Ne Taip
Anuliavimas
-3,19 EUR
Pateikite kortelę
Kortelė tinka
Išimkite kortelę