Sales Transaction With A Magstripe Card; Sales Transaction - Ingenico ICT220 User Manual

4.

SALES TRANSACTION WITH A MAGSTRIPE CARD

4.1

SALES TRANSACTION

The terminal is in the standby mode.
Enter the sum of the transaction as a final sum, for instance 319 (3.19 EUR) and then press
the green key (ENTER) to confirm.
In order to correct the sum, press the yellow key.
To cancel the transaction, press the red key.
Swipe the customer's card through the reader.
Enter the last four digits of the card's number.
Press the green key (ENTER) to confirm. The terminal controls, whether the entered
numbers correspond to the information on the magstripe.
The terminal shall perform automatic control and the following information will appear on the screen:
The terminal dials the control center's number
The terminal has established connection with the control center and performs the
automatic control.
The terminal receives an answer from the control center. The answer's code is shown on
the screen.
At the end of the transaction the terminal asks for confirmation for printing of the second
receipt.
When the red button is pressed the buyer's receipt is not printed.
The transaction is complete.
ACTION
12
SCREEN
Sveiki
Pateikite kortelę
3,19 EUR
Prašome palaukti
Keturi paskut. skaitm
-
Prisijungimas...
Prašome palaukti
Lauk. astak...
Prašome palaukti
Operacija atlikta
Paimkite kvitą
is nusp. klavišą