Sending Transactions Manually; Replacement Of The Paper Roll - Ingenico ICT220 User Manual

7.2

SENDING TRANSACTIONS MANUALLY

The terminal is in the standby mode.
Press F1 key
From the menu select "Siųsti" and then press the green key (ENTER) to confirm.
If you wish to send transactions, press TAIP or press the green key (ENTER).
The terminal shall dial the control center's number.
The terminal sends transactions
At the end of the communication session the terminal shall issue the report that demonstrates the number of transactions and
the total sum.
8.

REPLACEMENT OF THE PAPER ROLL

If a red line appears on receipts, the paper roll shall be replaced. Use only special thermal paper for the terminal.
1.-2. Open the paper roll cover
3. Place a new roll in place
4. Close the cover, tear off any excess paper
ACTION
17
SCREEN
Sveiki
Operacijos
1-Siųsti
2-Anuliuoti
3-Kortelės operac
4-Rankin įvedimas
Operacijos
Siųsti operac.?
Ar esate tikri?
Ne Taip
Prisijungimas...
Prašome palaukti
Operacijos
Siųsti