Reversal - Ingenico IWL220 User Manual

The transaction is complete.
Notes:

The transaction can be interrupted by pressing the RED button.

In case of an error in entering the sum and the card number, corrections can be made using the YELLOW button.

In order to enter letters, press and hold the respective key until the required letter appears.
Example: Where it is necessary to type 00001N, simply type 00001 and then hold number 6 until the letter N appears on the
screen.
2.3

REVERSAL

In order to reverse the transaction, do the following:
The terminal is in the standby mode.
Press the leftmost button on the key bar
From the menu select "Atcelšana" (to navigate through the menu use ▼ ▲ key bar keys
or central keys on the key bar) and then press the green key (ENTER) to confirm.
Enter the number of the receipt that you wish to reverse and then press the green key
(ENTER).
Where the receipt number is not entered, the terminal shall reverse the last transaction.
The terminal shall request confirmation for the reversal.
To continue press < Jā > or the green key (ENTER).
To cancel press < Nē > or the red key (CANCEL).
The chip card must be inserted in the terminal reader.
E Remove the card from the terminal.
The terminal shall commence automatic control and the following information will be displayed:
The terminal dials the control center's number and performs the automatic control.
The terminal receives an answer from the control center.
At the end of the transaction the terminal asks for confirmation for printing of the second
receipt. When the red button is pressed the buyer's receipt is not printed.
The transaction is complete.
ACTION
6
TERMINAL
Laipni lūdzam!
Transakcijas
1- Nosūtīt
2- Atcelšana
3- Kartes trans
4- Kvīts kopija
Atcelšana
Izsniegt kvīti Nr.
-
Atcelšana?
PAN:************0001
Summa: 3.19 EUR
Trans. Nr. 00001N
Nē Jā
Uzrādiet karti
-3.19 EUR
Karte kārtībā
Paņemiet karti
Pieslēgšanās...
Lūdzu, uzgaidiet
Transakcija
Trans. Pabeigta
Paņemiet kvīti
un spied taust.