Sales Transaction With A Contactless Card; Sales Transaction - Ingenico ICT220 User Manual

3.

SALES TRANSACTION WITH A CONTACTLESS CARD

3.1

SALES TRANSACTION

The terminal is in the standby mode.
Enter the sum of the transaction as a final sum.
For instance, 319 (3.19 EUR)
Then press the green key (ENTER).

In case of a contactless card transaction the card shall be
touched against the pinpad's screen
The terminal shall perform automatic control and the following information will appear on the screen
The terminal connects to the control center and performs
automatic control.
The terminal receives response from the control center.
The terminal receives the transaction confirmation from the
control center.
At the end of the transaction the terminal asks for confirmation
for printing of the second receipt.
When the red button is pressed the buyer's receipt is not printed.
The transaction is complete.
Notes:
Terminal can ask to use the card's chip.
(For instance, where the sum exceeds the contactless
transaction's limit).
Insert the chip card in the reader and perform the payment just as
you would in case of an ordinary chip card transaction.
ACTION PINPAD
Sveiki
Prašome palaukti
Pateikite kortelę
3,19 EUR
Prisijungimas...
Prašome palaukti
Operacija atlikta
Prašome palaukti
Informacija
Įstatykitę
kortelę į kortelių
skaitytuvą
Kortelės operac
11.00 EUR
Pateikite kortelę
8
TERMINAL
Sveiki
Suma (EUR)
Įveskite sumą...
3,19
Kortelės operac
3,19 EUR
Pateikite kortelę
Prisijungimas...
Prašome palaukti
Lauk. astak...
Prašome palaukti
Operacija atlikta
Paimkite kvitą
is nusp. klavišą
Informacija
Įstatykitę
kortelę į kortelių
skaitytuvą
Kortelės operac
11.00 EUR
Pateikite kortelę