Reports; Closing The Day; Automatic Sending Of Transactions - Ingenico ICT220 User Manual

6.

REPORTS

The terminal is in the standby mode.
Press F1 key
From the menu select "Info" (to navigate through the menu use ▼ ▲ keys or F2 and F3
keys) and then press the green key (ENTER) to confirm.
Select Dienos uždarymas if you wish to receive a copy of the previous sending report
Select Esamos operac if you wish to receive today's report, without sending transactions.
Select Peržiūrėti oper if you wish to receive more information on a specific receipt.
7.

CLOSING THE DAY

7.1

AUTOMATIC SENDING OF TRANSACTIONS

Daily transactions can be sent to the bank either automatically or manually. Automatic sending is performed at the time
programmed in the terminal. While automatic sending is in process no transaction can be performed!
At the end of the communication session the terminal shall issue the report that demonstrates the number of transactions and
the total sum.
OPERAC. FAILAS
Nr 1
Siuntimo laikas: 01.01.2011 1:00:00
PREKINIS PAVADINIMAS
ADRESAS
Term.: HPC11111 Reg.: 12345673 Biuras: 101
Valiuta: LTL (440)
Set "VISA"
Operacijos 1
Atšaukta 1
Viso 2
Operacijos 1
Atšaukta 1
Viso 2
Received 1 pcs, 0.00 units
Operacijų išsiuntimas pavyko
NB! IF THIS REPORT IS NOT PRINTED OUT, APPARENTLY THE TRANSACTIONS HAVE NOT REACHED
THE BANK!
Automatic sending is not performed where

No transactions were made after the last report has been sent

Sending was not successful, since the terminal was not plugged into the power network or the communication line used
by the terminal was not available.
Where automatic sending fails:

SEND TRANSACTIONS MANUALLY
NB! Where automatic sending fails, contact customer service of Nets Estonia.
ACTION
3.19
.................-3.19
0.00
3.19
-3.19
0.00
16
SCREEN
Sveiki
Operacijos
1-Siųsti
2-Anuliuoti
3-Kortelės operac
4-Rankin įvedimas
5-Kvito kopija
6-Info
Info
1-Dienos uždarymas
2-Esamos operac
3-Peržiūrėti oper