Reversal - Ingenico ICT220 User Manual

At the end of the transaction the terminal asks for confirmation for printing of the second
receipt.
When the red button is pressed the buyer's receipt is not printed.
The transaction is complete.
Notes:

The transaction can be interrupted by pressing the RED button.

In case of an error in entering the sum and the card number, corrections can be made using the YELLOW button.

In order to enter letters, press and hold the respective key until the required letter appears.
Example: Where it is necessary to type 00001N, simply type 00001 and then hold number 6 until the letter N appears on the
screen.
2.3

REVERSAL

In order to reverse the transaction, do the following:
The terminal is in the standby mode.
Press F1 key
From the menu select "Annulleerimine" (to navigate through the
menu use ▼ ▲ keys or F2 and F3 keys) and then press the
green key (ENTER) to confirm.
Enter the number of the receipt that you wish to reverse and then
press the green key (ENTER).
Where the receipt number is not entered, the terminal shall
reverse the last transaction.
The terminal shall request confirmation for the reversal.
To continue press <JAH> or the green key (ENTER).
To cancel press <EI> or the red key (CANCEL)
The chip card must be inserted in the PINPAD reader.
Remove the card from the reader.
ACTION PINPAD
TERE TULEMAST
PALUN OODAKE
PALUN OODAKE
PALUN OODAKE
Kasutage kaarti
-3.19 EUR
Õige kaart
Võta kaart
6
Võta kviitung ja
Vajuta klahvi
TERMINAL
TERE TULEMAST
Tehingud
1-Saatmine
2-Annulleerimine
3-Kaarditehing
4-Käsitsitehing
Annulleerimine
Anna kviitungi nr.
-
Annulleerida?
PAN:************0001
Summa: 3.19 EUR
Ei Jah
Annulleerimine
-3.19 EUR
Kasutage kaarti
Õige kaart
Võta kaart