ORiNG DGS-7084GCP-AIO_S SERIES User Manual page 98

Industrial managed gigabit bypass ethernet switch
Table of Contents

Advertisement

Label
Mode
Reauthentication
Enabled
Reauthentication
Period
EAP Timeout
Age Period
ORing Industrial Networking Corp
DGS-7084GCP-AIO_S SERIES User's Manual
Description
Indicates if 802.1X and MAC-based authentication is globally
enabled or disabled on the switch. If globally disabled, all ports
are allowed forwarding of frames.
If checked, clients are reauthenticated after the interval specified
by
the
Reauthentication
802.1X-enabled ports can be used to detect if a new device is
plugged into a switch port.
For MAC-based ports, reauthentication is only useful if the
RADIUS server configuration has changed. It does not involve
communication between the switch and the client, and therefore
doesn't imply that a client is still present on a port (see Age Period
below).
Determines the period, in seconds, after which a connected client
must
be
reauthenticated.
Reauthentication Enabled checkbox is checked. Valid values are
in the range 1 to 3600 seconds.
Determines the time the switch shall wait for the supplicant
response before retransmitting a packet. Valid values are in the
range 1 to 255 seconds. This has no effect for MAC-based ports.
This setting applies to ports running MAC-based authentication,
Period.
Reauthentication
This
is
only
active
for
if
the
97

Advertisement

Table of Contents
loading

Table of Contents