ORiNG DGS-7084GCP-AIO_S SERIES User Manual page 78

Label
Mode
Alive Check
Active
Alive Check Satus
Stream Check
Active
Stream Check
Status
DDoS Prevention
Acton
DDoS Prevention
Status
Device IP Address
Device MAC
Address
ORing Industrial Networking Corp
DGS-7084GCP-AIO_S SERIES User's Manual
Description
Indicates the per-port Device Binding operation. Possible modes are:
---: Disable.
Scan: Scan IP/MAC automatically, but no binding function.
Binding: Enable binding function. Under this mode, any IP/MAC
doesn't match the entry will not be allowed to access the network.
Shutdown: Shutdown the port (No Link).
Enable/Disable Alive Check. When enabled, switch will ping the
device continually.
Indicates the Alive Check status. Possible statuses are:
---: Disable.
Got Reply: Got ping reply from device, that means the device is still
alive.
Lost Reply: Lost ping reply from device, that means the device might
have been hanged.
Enable/Disable Stream Check. When enabled, switch will detect the
stream change(getting low) from device.
Indicates the Stream Check status. Possible statuses are:
---: Disable.
Normal: The stream is normal.
Low: The stream is getting low.
Enable/Disable DDOS Prevention. When enabled, switch will monitor
the device to against DDOS attack (from device).
Indicates the DDOS Prevention status. Possible statuses are:
---: Disable.
Analysing: Analyse the packet throughput for initialization.
Running: Function ready.
Attacked: DDOS attack happened.
Specify the IP Address of device.
Specify the MAC Address of device.
77