Table of Contents
Advertisement
Mode
Sensibility
Packet Type
Socket Number
Filiter
Action
Status
Device Description
ORing Industrial Networking Corp
DGS-7084GCP-AIO_S SERIES User's Manual
Enable/Disable DDOS Prevention of the port.
Indicates the level of DDOS detection. Possible levels are:
Low: Low sensibility.
Normal: Normal sensibility.
Medium: Medium sensibility.
High: High sensibility.
Indicates the packet type of DDOS monitor. Possible types are:
RX Total: Total ingress packets.
RX Unicast: Unicast ingress packets.
RX Multicast: Multicast ingress packets.
RX Broadcast: Broadcast ingress packets.
TCP: TCP ingress packets.
UDP: UDP ingress packets.
If packet type is UDP(or TCP), please specify the socket number
here. The socket number could be a range, from low to high. If the
socket number is only one, please fill the same number in low field
and high field.
If packet type is UDP(or TCP), please choose the socket direction
(Destination/Source).
Indicates the action when DDOS attack happened. Possible actions
are:
---: Do nothing.
Blocking 1 minute: To block the forwarding for 1 minute, and log the
event.
Blocking 10 minute: To block the forwarding for 10 minutes, and log
the event.
Blocking: Just blocking, and log the event.
Shunt Down the Port: Shut down the port(No Link), and log the event.
Only Log it: Just log the event.
Reboot Device: If POE supported, the device could be rebooted. And
log the event.
Indicates the DDOS Prevention status. Possible statuses are:
---: Disable.
Analysing: Analyse the packet throughput for initialization.
Running: Function ready.
Attacked: DDOS attack happened.
80
Advertisement
Table of Contents
