ORiNG DGS-7084GCP-AIO_S SERIES User Manual page 46

DGS-7084GCP-AIO_S SERIES User's Manual
Label Description
The switch port number of the corresponding STP CIST (and
Port
MSTI) port.
Controls the path cost incurred by the port. The Auto setting will
set the path cost as appropriate by the physical link speed, using
the 802.1D recommended values. Using the Specific setting, a
Path Cost user-defined value can be entered. The path cost is used when
establishing the active topology of the network. Lower path cost
ports are chosen as forwarding ports in favor of higher path cost
ports. Valid values are in the range 1 to 200000000.
Controls the port priority. This can be used to control priority of
Priority
ports having identical port cost. (See above).
Click to save changes.
Click to undo any changes made locally and revert to previously
saved values.
ORing Industrial Networking Corp 45