ORiNG DGS-7084GCP-AIO_S SERIES User Manual page 64

Label
Trap Mode
Trap Version
Trap Community
Trap Destination
Address
Trap Destination
IPv6 Address
Trap
Authentication
Failure
Trap Link-up and
Link-down
Trap Inform Mode
Trap Inform
Timeout(seconds)
Trap Inform Retry
Times
Trap Probe
ORing Industrial Networking Corp
DGS-7084GCP-AIO_S SERIES User's Manual
Description
Indicates the SNMP trap mode operation. Possible modes are:
Enabled: Enable SNMP trap mode operation.
Disabled: Disable SNMP trap mode operation.
Indicates the SNMP trap supported version. Possible versions are:
SNMP v1: Set SNMP trap supported version 1.
SNMP v2c: Set SNMP trap supported version 2c.
SNMP v3: Set SNMP trap supported version 3.
Indicates the community access string when send SNMP trap packet.
The allowed string length is 0 to 255, and the allowed content is the
ASCII characters from 33 to 126.
Indicates the SNMP trap destination address.
Trap Destination IPv6 Address
Provide the trap destination IPv6 address of this switch. IPv6 address
is in 128-bit records represented as eight fields of up to four
hexadecimal digits with a colon separates each field (:). For example,
'fe80:215:c5ff:fe03:4dc7'. The symbol '::' is a special syntax that can
be used as a shorthand way of representing multiple 16-bit groups of
contiguous zeros; but it can only appear once. It also used a
following legally IPv4 address. For example, '::192.1.2.34'.
Indicates the SNMP entity is permitted to generate authentication
failure traps. Possible modes are:
Enabled: Enable SNMP trap authentication failure.
Disabled: Disable SNMP trap authentication failure.
Indicates the SNMP trap link-up and link-down mode operation.
Possible modes are:
Enabled: Enable SNMP trap link-up and link-down mode operation.
Disabled: Disable SNMP trap link-up and link-down mode operation.
Indicates the SNMP trap inform mode operation. Possible modes
are:
Enabled: Enable SNMP trap inform mode operation.
Disabled: Disable SNMP trap inform mode operation.
Indicates the SNMP trap inform timeout. The allowed range is 0 to
2147.
Indicates the SNMP trap inform retry times. The allowed range is 0 to
255.
Indicates the SNMP trap probe security engine ID mode of operation.
63