Table of Contents
Advertisement
Step 4. The COM port properties setting, 115200 for baud rate, 8 for Data bits, None for Parity,
1 for Stop bits and none for Flow control.
Step 5. The Console login screen will appear. Use the keyboard to enter the Username and
Password (The same with the password for Web Browser), then press "Enter".
CLI Management by Telnet
Users can use "TELNET" to configure the switches.
The default value is as below:
ORing Industrial Networking Corp
DGS-7084GCP-AIO_S SERIES User's Manual
126
Advertisement
Table of Contents
