ORiNG DGS-7084GCP-AIO_S SERIES User Manual page 84

Label
Port
Policy ID
Action
Rate Limiter ID
Port Copy
Logging
Shutdown
Counter
4.1.10.3.2 Rate Limiters
Configure the rate limiter for the ACL of the switch.
ORing Industrial Networking Corp
DGS-7084GCP-AIO_S SERIES User's Manual
Description
The logical port for the settings contained in the same row.
Select the policy to apply to this port. The allowed values are 1
through 8. The default value is 1.
Select whether forwarding is permitted ("Permit") or denied ("Deny").
The default value is "Permit".
Select which rate limiter to apply to this port. The allowed values are
Disabled or the values 1 through 15. The default value is "Disabled".
Select which port frames are copied to. The allowed values are
Disabled or a specific port number. The default value is "Disabled".
Specify the logging operation of this port. The allowed values are:
Enabled: Frames received on the port are stored in the System Log.
Disabled: Frames received on the port are not logged.
The default value is "Disabled". Please note that the System Log
memory size and logging rate is limited.
Specify the port shut down operation of this port. The allowed values
are:
Enabled: If a frame is received on the port, the port will be disabled.
Disabled: Port shut down is disabled.
The default value is "Disabled".
Counts the number of frames that match this ACE.
83